北京赛车PK10计划

济南震辉保温材料有限公司
地址:章丘工业园
联系人:卢经理
电话:0531-87266820
传真:0531-87266820
邮箱:390062028@qq.com
网址:ejointrans.com
当前位置:北京赛车PK10计划 - 新闻动态
新闻动态
粘贴挤塑板的要点事宜有哪些?
作者:admin 来源:本站 发布时间:2020-04-23 14:33:37 浏览次数:177
  挤塑板是一种绿色环保型的保温材料,它具有优异的保温隔热性能,高强度的抗压性,防腐性能卓越等特点,因而很多客户会在家里装修中选择挤塑板,但在这里小编要提醒各位在粘贴挤塑板的时候,需要注意以下要点:
Extruded board is a kind of green and environmental friendly heat preservation material, which has excellent heat preservation and insulation performance, high-strength compression resistance, excellent corrosion resistance and other characteristics, so many customers will choose extruded board in home decoration, but here we want to remind you that when pasting extruded board, we need to pay attention to the following points:
一、施工前,应该编制挤塑板的排版图,以达到节约材料,加快施工速度的目的。
1、 Before construction, the layout of extruded board should be prepared to save materials and speed up construction.
二、指定某一基面处理完成的楼层作为样板层进行样板层施工。
2、 Specify a finished floor as a template layer for template layer construction.
三、用条点法涂好聚合物砂浆的挤塑板必须立即粘贴在墙面上,速度要快。
3、 The extruded board coated with polymer mortar by strip point method must be pasted on the wall immediately, with fast speed.
四、按照事先排好的尺寸切割挤塑板,从拐角处垂直错缝连接,要求拐处沿建筑物全高顺直、完整。
4、 Cut the extruded board according to the size arranged in advance, and connect it vertically and staggered from the corner. The turning point is required to be straight and complete along the whole height of the building.
五、用抹子在每块挤塑板周边涂50mm宽专用聚合物粘结砂浆,要求从边缘向中间逐渐加厚。

北京赛车PK10计划 5、 Use trowel to apply 50mm wide special polymer bonding mortar around each extruded board, which is required to be thickened gradually from the edge to the middle.

六、粘贴挤塑板时,板缝应挤紧,相邻板应齐平,施工时控制板间缝隙不得大于2m。
6、 When pasting extruded boards, the board joints shall be squeezed tightly, the adjacent boards shall be flush, and the gap between control boards shall not be more than 2m during construction.
七、挤塑板按照上述要求贴墙后,用2m靠尺反复压平,保证其平整度及粘结牢固。
7、 After the extruded board is attached to the wall in accordance with the above requirements, it shall be repeatedly flattened with a 2m guiding rule to ensure its flatness and firm adhesion.
八、在门窗洞口部位的挤塑板,不允许用碎板拼凑,需用整幅板切割。
8、 The extruded boards at the door and window openings are not allowed to be pieced together with broken boards, which need to be cut with the whole board.
九、挤塑板应粘贴牢固,不得有空鼓和松动。
9、 The extruded board shall be firmly pasted without hollowing and loosening.
十、为防止外墙漏水,要求窗洞口四周侧壁挤塑板与副框间留通槽。
10、 In order to prevent water leakage from the external wall, a through slot is required between the side wall extrusion board and the auxiliary frame around the window opening.
十一、在窗洞口位置的板块之间搭接留缝要考虑防水问题。多有关挤塑板的相关内容请访问我们的网址:http://ejointrans.com
11、 The waterproof problem shall be considered in the lap joint between plates at the window opening. For more information about extruded boards, please visit our website: http://ejointrans.com
var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = "https://hm.baidu.com/hm.js?be055eb5acfdc25d3bd72279b8418725"; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();